𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗠𝗼𝗺𝗲𝗻𝘁 𝗬𝗼𝘂 𝗥𝗲𝗮𝗹𝗶𝘀𝗲 𝘁𝗵𝗲 𝗦𝘁𝗲𝗽𝗽𝗲𝗿 𝗜𝘀 𝗧𝗼𝗮𝘀𝘁
15th October

Yes, they're reliable but when you've replaced everything else...
#MakerDay #MakersGonnaMake #WorkshopLife

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 '𝗜𝘁'𝘀 𝗢𝗻𝗹𝘆 𝗮 𝗦𝗺𝗮𝗹𝗹 𝗖𝗿𝗮𝗰𝗸' 𝗗𝗲𝗻𝗶𝗮𝗹
14th October

No-one will ever notice, probably...
#MakerDay #MakersGonnaMake #Improvisation

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗨𝗻𝗲𝘅𝗽𝗹𝗮𝗶𝗻𝗲𝗱 𝗥𝗮𝘀𝗽𝗯𝗲𝗿𝗿𝘆 𝗣𝗶 𝗡𝗲𝘁𝘄𝗼𝗿𝗸 𝗗𝗶𝘀𝗰𝗼𝗻𝗻𝗲𝗰𝘁
13th October

""Have you tried turning it off and turning it on again?""
#MakerDay #MakersGonnaMake #RPi #RaspberryPi

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗔𝗿𝗯𝗶𝘁𝗿𝗮𝗿𝗶𝗹𝘆 𝗖𝗵𝗮𝗻𝗴𝗶𝗻𝗴 𝘁𝗵𝗲 𝗖𝗼𝗼𝗹𝗶𝗻𝗴 𝗙𝗮𝗻 𝗦𝗽𝗲𝗲𝗱
12th October

Well, nothing else has worked so might as well...
#MakerDay #MakersGonnaMake #IfAllElseFails #3dPrinting

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗠𝗼𝗺𝗲𝗻𝘁 𝗬𝗼𝘂 𝗥𝗲𝗮𝗹𝗶𝘀𝗲 𝘁𝗵𝗲 𝗣𝗮𝗿𝘁 𝗜𝘀 𝗧𝗼𝗼 𝗛𝗲𝗮𝘃𝘆
11th October

We've all been through the ""it didn't look that heavy"" experience!
#MakerDay #MakersGonnaMake #Design #SafetyFactor

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗘𝗻𝗱𝗹𝗲𝘀𝘀 𝗗𝗼𝗰𝘂𝗺𝗲𝗻𝘁𝗮𝘁𝗶𝗼𝗻 𝗥𝗲𝗮𝗱𝗶𝗻𝗴
10th October

Sadly, makers are not documentation writers and documentation writers are not users.
#MakerDay #MakersGonnaMake #WorkshopLife

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 '𝗜 𝗦𝗵𝗼𝘂𝗹𝗱 𝗛𝗮𝘃𝗲 𝗨𝘀𝗲𝗱 𝗮 𝗕𝗲𝘁𝘁𝗲𝗿 𝗖𝗼𝗺𝗽𝗼𝗻𝗲𝗻𝘁' 𝗥𝗲𝗴𝗿𝗲𝘁
9th October

Buy cheap, pay twice! (Plus the other stuff damaged by the cheap part failing!)
#MakerDay #MakersGonnaMake #QualityControl

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗨𝗻𝗻𝗲𝗰𝗲𝘀𝘀𝗮𝗿𝘆 𝗨𝘀𝗲 𝗼𝗳 𝗛𝗼𝘁 𝗔𝗶𝗿 𝗥𝗲𝘄𝗼𝗿𝗸 𝗦𝘁𝗮𝘁𝗶𝗼𝗻
8th October

Well we all need some way of keeping the coffee hot!
#MakerDay #MakersGonnaMake #Soldering #WorkshopLife

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗗𝗲𝗰𝗹𝗮𝗿𝗶𝗻𝗴 𝘁𝗵𝗲 𝗣𝗿𝗼𝗷𝗲𝗰𝘁 '𝗪𝗮𝘁𝗲𝗿 𝗥𝗲𝘀𝗶𝘀𝘁𝗮𝗻𝘁'
7th October

Of course, there is water... and then there's water!
#MakerDay #MakersGonnaMake #Design

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗡𝗲𝘃𝗲𝗿-𝗘𝗻𝗱𝗶𝗻𝗴𝗹 𝗙𝗶𝗹𝗮𝗺𝗲𝗻𝘁 𝗢𝗿𝗱𝗲𝗿
6th October

Celebrating those who don't understand the difference between need and want.
#MakerDay #MakersGonnaMake #3dPrinting

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗔𝗿𝗯𝗶𝘁𝗿𝗮𝗿𝗶𝗹𝘆 𝗜𝗻𝗰𝗿𝗲𝗮𝘀𝗶𝗻𝗴 𝘁𝗵𝗲 𝗩𝗼𝗹𝘁𝗮𝗴𝗲 𝘁𝗼 𝘁𝗵𝗲 𝗠𝗼𝘁𝗼𝗿
5th October

Ah yes, the fine line between more power and a smoke generator!
#MakerDay #MakersGonnaMake #Electronics

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 '𝗜𝘁'𝘀 𝗝𝘂𝘀𝘁 𝗮 𝗦𝗺𝗮𝗹𝗹 𝗢𝘃𝗲𝗿𝗵𝗮𝗻𝗴' 𝗗𝗲𝗹𝘂𝘀𝗶𝗼𝗻
3rd October

That'll print without supports - no problem!
#MakerDay #makersgonnamake #3dPrinting

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗙𝗼𝗿𝗴𝗲𝘁𝘁𝗶𝗻𝗴 𝘁𝗼 𝗦𝗲𝘁 𝘁𝗵𝗲 𝗖𝗼𝗿𝗿𝗲𝗰𝘁 𝗟𝗮𝘆𝗲𝗿 𝗛𝗲𝗶𝗴𝗵𝘁
2nd October

That last attempt to go big didn't work either!
#MakerDay #makersgonnamake #3dPrinting

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗨𝗻𝗲𝘅𝗽𝗹𝗮𝗶𝗻𝗲𝗱 𝗕𝗲𝗱 𝗔𝗱𝗵𝗲𝘀𝗶𝗼𝗻 𝗙𝗮𝗶𝗹𝘂𝗿𝗲
1st October

I NEVER have bed adhesion probl......
#MakerDay #makersgonnamake #3dprinting

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗨𝗻𝗻𝗲𝗰𝗲𝘀𝘀𝗮𝗿𝘆 𝗖𝘂𝘀𝘁𝗼𝗺 𝗗𝗶𝘀𝗽𝗹𝗮𝘆 𝗕𝗼𝗼𝘁 𝗦𝗰𝗿𝗲𝗲𝗻
30th September

It may only be there for a couple of seconds, but 1st impressions last!
#MakerDay #MakersGonnaMake #FirstImpressionsLast

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗗𝗲𝗰𝗹𝗮𝗿𝗶𝗻𝗴 𝘁𝗵𝗲 𝗖𝗼𝗱𝗲 '𝗢𝗽𝘁𝗶𝗺𝗶𝘇𝗲𝗱'
29th September

Well, at least, shorter. And there are even a few explanatory comments!
#MakerDay #MakersGonnaMake #Coding

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗿𝘆𝗶𝗻𝗴 𝘁𝗼 𝗗𝗲𝗯𝘂𝗴 𝗮 𝗦𝗣𝗜 𝗕𝘂𝘀 𝗘𝗿𝗿𝗼𝗿
28th September

Plug and play? Automatic handshake? Today is for those who know otherwise!
#MakerDay #MakersGonnaMake #Microcontroller #Debugging

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗠𝗼𝗺𝗲𝗻𝘁 𝗬𝗼𝘂 𝗥𝗲𝗮𝗹𝗶𝘀𝗲 𝘁𝗵𝗲 𝗗𝗿𝗶𝘃𝗲 𝗕𝗲𝗹𝘁 𝗜𝘀 𝗦𝗹𝗶𝗽𝗽𝗶𝗻𝗴
27th September

And now begins the hunt for the Allen key to tighten the drive wheel!
#MakerDay #MakersGonnaMake #WorkshopLife

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 '𝗜'𝗹𝗹 𝗝𝘂𝘀𝘁 𝗦𝗰𝗮𝗹𝗲 𝗜𝘁 𝗗𝗼𝘄𝗻' 𝗠𝗶𝘀𝘁𝗮𝗸𝗲
26th September

If only the designer had said which parts they did in inches and which parts were in mm!
#MakerDay #MakersGonnaMake #Design #DesignRules

I𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗙𝗼𝗿𝗴𝗲𝘁𝘁𝗶𝗻𝗴 𝘁𝗼 𝗖𝗵𝗲𝗰𝗸 𝘁𝗵𝗲 𝗙𝗶𝗹𝗮𝗺𝗲𝗻𝘁 𝗛𝘂𝗺𝗶𝗱𝗶𝘁𝘆
25th September

It may have come straight out of the bag, but the bag was filled in the monsoon season!
#MakerDay #MakersGonnaMake #3dPrinting #DryYourFilament